Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

How to operate the reactor temperature controller

       Reactors can be divided into endothermic reactions and exothermic reactions according to the characteristics of the reaction. Generally speaking, polymerization reactions are exothermic reactions. Fission reactions are endothermic reactions. In chemistry, a chemical reaction that results in the absorption of heat is called an endothermic reaction. Follow the steps below to view the operating controller temperature control instrument.
       1: Turn on the power and check the parameter CTRL. If the parameter value = 1, then the instrument has not been adjusted and can be adjusted according to the next step. If this parameter = 3, then the instrument has been adjusted and this parameter needs to be changed to 1.
  
       Three: After reading the above parameters, return to the display interface and set the temperature setting value according to the reactor experimental requirements, assuming that the setting value is X.
   When the measured value = The reactor instrument starts to adjust. When the alternate display stops, the adjustment ends. After the adjustment, let the instrument stabilize for a period of time before it can be used in the next experiment.
       Please indicate the source for reprinting: http://www.wxmwhg.com
1561 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke