Considering the requirements of maintaining concentricity when installing the transmission device and the shaft seal device and the convenience of loading, unloading and maintenance, a base is often welded on the head, and the entire transmission device, including the machine base and the shaft seal device, are installed on this base. The design content of the reactor transmission device generally includes: selecting the motor, reducer and coupling, selecting or designing the machine base and designing the base, etc.
The reaction kettle is often equipped with a stirrer and has corresponding speed requirements, which requires a motor and transmission device to drive it to rotate. The transmission device is usually placed above the reactor, usually in a vertical arrangement. The electric motor reduces the speed to the mixing speed required by the process through the reducer, and then drives the stirring shaft to rotate through the coupling. A machine base is provided under the reducer for installation on the head.
Most of the motors used in reactors are used with reducers. Only when the stirring speed is very high, the motor can directly drive the stirring shaft without the reducer. Therefore, the selection of the motor should generally be considered in conjunction with the selection of the reducer. In many cases, the motor and reducer are supplied together, and the matching motor can be selected according to the selected reducer during design.
Please indicate the source when reprinting:
http://www.wxmwhg.com/