Stainless steel reactor specifications
Stainless steel reactor specifications?The stainless steel reaction kettle consists of a kettle body, a kettle cover, a jacket, a stirrer, a transmission device, a shaft seal device, and a support.Select your own according to the user's requirements.A jacket is set outside the boiler wall, or a heat exchange surface is set inside the boiler, and heat exchange can also be carried out through external circulation.The bearings have support type or ear type bearings, etc.Gear reducers should be used when the speed exceeds 160 rpm.The number of holes, specifications or other requirements can be designed and manufactured according to user requirements.
Stainless steel reactor specifications?
1. Material of stainless steel reactor
Parts in contact
with the material can be made of good stainless steel such as 304 or 316L.
2. Accessories for stainless steel reactors
Multi-purpose frame
mixing in the form of mixing, which protects the uniform blending of materials; at the same time, box, anchor, slurry, etc. can be selected according to needs
The seal is mechanically sealed, the pressure inside the tank is stable, and the material in the tank will not leak, causing unnecessary pollution;
The interface adopts a specification-compliant quick-assembly clamp type, which is convenient for hygiene;
3. Surface treatment of stainless steel reactor
The
inner surface is mirrored and polished, and the adhesive is not attached, which is relatively hygienic. The fully enclosed design reduces the pollution problem of the material. The outer surface can be treated with sandblasting, frosting, and cold rolling.
Stainless steel reaction kettle has the characteristics of rapid heating, high temperature application, corrosion resistance, hygiene, less pollution, no need for boiler automatic heating, easy to use, etc. It can be used in petroleum, chemical, rubber, pesticide, dyes, medicine, food, to complete the process of vulcanization, nitrification, hydrogenation, hydrocarbonation, polymerization, condensation and other processes.
Reactor is a kind of reaction equipment, be sure to pay attention when operating, otherwise it will cause a lot of damage for many reasons, resulting in unnecessary production stop.The reaction kettle widely used in the chemical industry, due to the corrosiveness of the medium, the reaction conditions are cold and hot, transportation, use, man-made and other problems, there will always be such and such enamel layer damage, resulting in unnecessary production stop. If a large area falls off, it is recommended to only return to the factory to re-enamelize.