Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Repair methods for reactor failure

Repair method for   reactor failure?Reactor is a common equipment in chemical plants. Equipment failure affects work and generates economic losses. Today, the reactor manufacturer will briefly introduce the repair method for the reactor failure.
  1. Fault phenomenon: high noise in the magnetically coupled actuator
Cause of   failure: The sleeve and bearing are out of lubricant, and the inner magnet rotates and jumps.
  Measures: It is necessary to contact the reactor manufacturer to replace the bearings and sleeves.
  2. Fault Phenomena: Meter Failure
  Solution: Test the function of the instrument, and the production process strictly follows the operating procedures;
  3. Fault phenomenon: Leakage on the sealing surface.
Cause of   failure: Screw thread is loose or sealing surface is damaged.
  Solution: If the screw thread is loose, tighten the screw. If the sealing surface is damaged, it needs to be re-grinded or replaced directly.
  4. The outer magnet rotates and the inner magnet does not rotate, and the motor current decreases.
Cause of   failure: Poor cooling cycle in the kettle, excessive temperature, internal magnetic steel disorder.
  Solution: At this time, you need to contact the supplier to replace the inner magnet.
The   reactor manufacturer reminds you not to disassemble the machine yourself if the cause of the failure is unclear, and there is a problem to contact the manufacturer.
  Reproduced Please indicate the source: http://www.wxmwhg.com
1556 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke