Basic Parameters of Spiral Plate Heat Exchanger
1. The nominal pressure PN of the spiral plate heat exchanger is specified as 0.6, 1, 1.6, 2.5Mpa (that is, the original 6, 10, 16, 25kg/cm). The test pressure is 1.25 times the working pressure.
2. The material of the contact part between the equipment and the medium is carbon steel Q235 A, Q235 B, and the stainless steel acid port is SUS321, SUS304, 3161.Other materials can be selected according to user requirements.
3. Allowable working temperature: t = 0- +350 ℃ of carbon steel.t = -40-500°C for stainless steel acid steel.According to the relevant provisions of the pressure vessel, when this equipment is selected, the fluid in the helical plate heat exchanger channel should be turbulent through appropriate process calculation.(general liquid flow rate 1m/Sec gas flow rate 10m/Sec).The equipment can be placed horizontally or vertically, but it can only be placed vertically when used for vapor condensation; the whole heat treatment must be carried out for the caustic soda industry to eliminate stress.
4. When selecting equipment, the liquid in the equipment channel should be turbulent through appropriate process calculations (general liquid velocity ≥ 0.5m/s; gas ≥ 10m/s).
5. The
spiral plate heat exchanger can be placed horizontally or vertically, but it can only be placed vertically when used for steam condensation.
6. For the caustic soda industry, the overall heat treatment must be carried out to eliminate stress.
7. When the flow value difference between the two sides of the channel is large, unequally spaced channels can be used to optimize the process design.