Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Correct Cleaning Methods for Tube Condenser

       In the long-term use of cold storage, if the tubular condenser of the cold storage system is not regularly cleaned, it will cause a large amount of dirt and grime to accumulate, which will affect the cooling efficiency of the cold storage system; then, for most users, in the use of cold storage, there is no more concern than its correct cleaning method.
       1. Before cleaning the tubular condenser, the condenser water inlet valve of the refrigerator must be closed in time;
2. After the valve is closed, the excess water in the Longpu refrigeration system is discharged in time;
       3. In order to ensure good cleaning results, two temporary circulation systems must be set on the inlet and outlet pipes of the product; this circulation system can remove the sewage valve, safety valve, pressure gauge, etc., and then connect through the hose and the external circulation pump;
       4. After making the corresponding preparations, you can dissolve the safe, economical,, and durable descaling agent, and then use the pump to add water from the low part of the product, let it soak for about 3 to 5 hours, and clean the scale inside the product.
5. Wait until the dirt inside the product is cleaned, discharge the sewage in time, and replace the clean water and rinse again;
       6. After the entire cleaning process, it is also necessary to open the end plate of the product and pull it back and forth on the inner wall of each copper pipe with a brush to clean the dirt and scale on the inner wall of the copper pipe, so that it is clean and bright without corrosion.
       7. After cleaning, discharge the sewage in time, rinse it repeatedly with clean water, and then cover the end cap of the product to restore it to its original state; add a pre-film agent for about 10 to 20 minutes, soak it for 24 hours, and discharge the sewage, so that the inside of the copper pipe can form a protective film, which not only oxidizes, but also slows down fouling.
       Proper cleaning procedures and processes can generally extend the service life of tubular condensers appropriately. Maintenance and care at the later stage of the product are very important, and this product is no exception.
1095 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke