Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

How to Choose Between Horizontal and Vertical Tube Condenser

       Under the conditions permitted by the design, when selecting products, materials with large elastic modulus, low yield strength, and relatively stable mechanical properties should be selected. Take technological measures to formulate a process to reduce deformation. For hard materials hardened by cold work, the equipment should be annealed before bending to reduce its hardness and reduce the amount of springback. After bending, it should be quenched to comply with the properties of the raw material. This method is not suitable for materials that cannot be strengthened by heat treatment. Appropriately increase the additional tensile force to reduce the size of the elastic deformation zone. This type of method is only suitable for products with relatively large material elasticity and a bending radius of r≥(10~15)t, such as products with stretch bending technology. Reasonably increase the correction and trimming processes. Take some control measures in mold structure design.
   The deformation mechanism of the two methods is to reduce the bending rebound value by increasing the degree of bending deformation. Complete sharp corner upsetting method The complete sharp corner upsetting method refers to the method of using the fillet radius of the bottom of the mold under the product.
       Determine the amount of springback based on empirical parameters. Analysis of the difference between horizontal and vertical types of tubular condensers. The bending parts are relatively complex and may be accompanied by a local loading cold working stress process. The rebound shape of the parts is the cumulative effect of the forming process. The springback problem in plate bending and forming is very complex. In actual production, the corresponding method must be selected based on the size of the product batch, the accuracy requirements of the bending parts, and the manufacturing conditions of the bending mold to ensure product quality and improve product accuracy.
1132 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke