Structural Performance of Spiral Plate Heat Exchanger
1. This equipment is rolled from two sheets to form two uniform spiral channels. The two heat transfer media can flow in full counter-current, which greatly increases the heat exchange effect. Even two small temperature difference media can still meet the appropriate heat exchange effect.
2. The nozzle on the shell adopts a tangential structure, which has small local resistance. Since the curvature of the spiral channel is uniform, the liquid flows in the equipment without major deflection, and the total resistance is small. Therefore, the design flow rate can be increased to give it a higher heat transfer capability.
3. The end face of the spiral channel of the I-type spiral plate heat exchanger is welded and sealed, so it has high sealing performance.
4. The structural principle of type II equipment is basically the same as that of type I equipment, but one of the channels can be disassembled and cleaned, which is especially suitable for heat exchange of viscous and precipitated liquids.
5. The structural principle of type III equipment is basically the same as that of type I equipment, but its two channels can be disassembled for cleaning, and its application range is wider.
Please indicate the source for reprinting:
http://www.jshh.com