Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

How to Improve Heat Transfer Efficiency of Condenser

       1. The heat transfer coefficient of the condenser rises only by simultaneously increasing the surface heat transfer coefficients on both hot and cold sides, reducing the thermal resistance of the dirt layer, selecting plates with high thermal conductivity, and reducing the thickness of the plates, in order to increase the heat transfer coefficient.
       2. Rising logarithmic mean temperature difference
       Condenser The flow patterns include counter-flow, downstream and mixed flow (both counter-flow and downstream). Under the same working conditions, the logarithmic average temperature difference is large during countercurrent flow and very small during downstream flow, and the mixed flow pattern is somewhere between the two. The method to increase the logarithmic average temperature difference of the equipment is to use a countercurrent or close to countercurrent mixed flow pattern as much as possible to increase the temperature of the hot side fluid and reduce the temperature of the cold side fluid as much as possible.  
       3. Determination of the position of the inlet and outlet pipes
     The greater the temperature difference of the medium, the stronger the natural convection of the fluid, and the more obvious the influence of the stagnation zone formed. Therefore, the inlet and outlet positions of the medium should be arranged so that hot fluid enters and exits at the top, and cold fluid enters and exits at the bottom, so as to reduce the influence of the stagnant zone and increase the heat transfer efficiency.
2145 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke