Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Design and Production Steps of Tube Condenser

       The design and calculation steps of the tube condenser: first calculate its heat transfer area and select the heat exchange equipment model.
 
       Determine the type of heat exchange equipment based on the temperature difference and design requirements of the two fluids of the tube condenser; select the total heat transfer coefficient value based on the properties of its heat exchange fluid and design experience; based on the total heat transfer rate equation of the equipment, initially calculate the heat transfer area, and determine the basic size of the equipment or select equipment specifications according to a series of standards. Then calculate the pressure drop on the tube and shell sides. Based on the preliminary equipment specifications, calculate the flow rate and pressure drop on the tube and shell sides. Check whether the calculation results are reasonable or meet the process requirements. If the pressure drop does not meet the requirements, adjust the flow rate, then determine the distance between the tube side and the baffle, or select other types of equipment, and recalculate the pressure drop until it meets the requirements; calculate the total heat transfer coefficient of the tube condenser, and calculate the tube and shell side convection heat transfer coefficients, determine the dirt thermal resistance, then calculate the total heat transfer coefficient, and then compare with the value.
1372 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke