Analysis of Tube Condenser Leakage Causes
1. External force damage:
2. Wear and corrosion:
Some tube condensers have been used for many years, and the steel tube wall has been corroded by the wear and tear of impurities in the cooling water and materials, causing some damage to the tube wall. In addition, in order to remove scale, dirt, rust, etc., cleaning must be performed once or twice a year, which also causes some damage to the pipe wall and pipe shell. In addition, hard objects such as sand contained in the primary water will also cause wear to the pipe wall.
3. Poor welding quality:
In most cases, the leakage of the tube condenser is at the weld between the end flower plate and the tube head. Weld leakage can only indicate a welding quality problem. Since this part is usually welded by manual arc welding, there are phenomena such as slag inclusions, bubbles, incomplete welding seams, and incomplete welding. These situations are difficult to judge in the early stages, but they will be exposed after using them for a period of time.
4. The quality of steel pipes is poor:
The equipment is exposed to the outside by a steel plate casing. The tubes are evenly distributed inside the casing, and both ends are welded to the flower plates at both ends of the casing. The tubes will not be damaged by external forces.
Please indicate the source for reprinting:
http://www.jshh.com