Flow Path Arrangement of Tube Condenser
In the layout of the tube condenser flow path, the influence of gravity cannot be ignored. The total pressure drop of the equipment in a single cycle is too large, and the heat resistance and coefficient distribution of the pressure drop along the heat transfer are not equal.
16px;">The steady-state distribution parameters are compared with previous experimental results, and the numerical simulation results are consistent with the experimental results. This model is used for the heat transfer and flow characteristics of its double-row equipment in different process configurations. Through the experimental results, for any equipment set in the process, when the air volume is constant, there is a reasonable refrigerant flow rate for condensation, and the performance is optimized.
16px;">The change in heat removal efficiency is not obvious when the dry bulb temperature is the same as that of air and water. As it increases the wet bulb temperature, the volume of water sprayed from its heat removal capacity is significantly reduced, and the heat removal efficiency slightly increases.