Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Ways to Strengthen Storage Tanks

       1. Strengthening circle
Under the same load, FRP materials have greater deformation than steel, which means that in a design requiring the same stiffness, the structural thickness of FRP materials is greater than that of steel. The increase in thickness will not only bring difficulties to the forming technology of FRP storage tanks, but also increase production costs. This problem is more prominent in storage tank planning, and the use of reinforcing circles is an effective way to solve the dilemma.
The reinforcement can be set outside the cylinder or tank, but from the perspective of appearance or strength, it is obviously best to set it up inside the cylinder or tank. Reinforcement rings usually use hard polyvinyl chloride (HPVC) or direct materials, which should be surface treated. Both materials must be closely bonded with the cylinder and tank to increase the effect.
2. Saddle support
Horizontal storage tanks should be equipped with supports for load-bearing and fixation requirements. For small and medium-sized storage tanks, two saddle-shaped supports are mostly used, and their effect is the same as that of the lifting beam. However, in the contact area with the storage tank, the support acts as a cylindrical shell, and the stress increases there. When planning, the setting of the reinforcing ring should be considered based on formulas and charts.
3. Head
The head types of FRP storage tanks include hemispherical, semi-ellipsoidal and dish-shaped. Under normal circumstances, it is convenient to construct. The barrel and the head can be formed separately, and then the whole body can be pasted together when they reach a certain thickness. Due to the change in curvature of the connecting outer diameter line, stress should be added when reinforcing and eliminating it.
1388 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke