Analysis of heat exchanger anti-corrosion methods
While using heat exchangers, we must also have anti-corrosion methods, so the staff of the heat exchanger manufacturer will explain them to us.
1. Select corrosion-resistant materials
2. Use anti-corrosion coating method
The metal surface is covered with a corrosion-resistant coating protective layer through a coating method to prevent direct contact between the metal surface and the corrosive medium.
3. Adding corrosion inhibitor method
In corrosive media, adding a small amount of certain substances can greatly reduce or even stop the corrosion of metals. Such substances are called corrosion inhibitors. The addition of corrosion inhibitors should be based on the principle of not affecting the production process and product quality.
4. Electrochemical protection method
The electrochemical protection method is divided into negative and positive protection. Yin protection uses an external DC power supply to change the positive energy on the metal surface into negative energy and thereby protect it. This method consumes a lot of power, is expensive and rarely used. The anode protection method is to connect the protected equipment to the anode of an external power supply, so that a passivation film is formed on the metal surface to achieve protection. Carbon steel heat exchangers are low-cost, but have poor corrosion resistance. The service life of the heat exchanger can be improved by using sacrificial sun protection technology, but the protection function of this technology is only used within a limited length at the entrance of the tube, and it is difficult to achieve cathode protection deep inside the tube, so the application of sacrificial sun protection method on heat exchangers is limited.