How to Extend Service Life of Tube Condenser
The tube condenser is actually a kind of consumption-saving heat exchange equipment. There are two main problems during its operation: the formation of scale and dirt. Because of its evaporation and vaporization working mechanism, it is easier to scale than other types of tube condensers. Therefore, regarding the protection of the tube condenser, the main thing to consider is how to deal with its scaling.
The product is operated outdoors. The water on the surface of the pipe is prone to condensation due to continuous evaporation, high temperature and humidity, and is prone to corrosion. In order to solve this phenomenon, the upper and lower boxes of the product should ensure sufficient galvanizing thickness. Since the water on the surface of the tubes continues to evaporate and is prone to scaling, it will greatly reduce the heat exchange efficiency of the
tube condenser. Therefore, the following measures can be taken to solve the problem of scaling.
In the daily operation of the product, the equipment pipeline must be cleaned and inspected frequently to complete its maintenance. During the operation process, the refrigerant undergoes two-phase transformation and generates high-frequency vibration, so it is difficult to form a scaling point, causing scale to be unable to adhere to the pipe wall; pre-film anti-scaling treatment should be carried out during product manufacturing, which can effectively prevent dirt crystals from adhering to the surface of the copper pipe; use a small number of continuous drainage equipment, Control the concentration factor of calcium ions in the cooling circulating water within a certain range to effectively prevent the separation of scale; you can also set up a precooler to keep the surface evaporation temperature of the product pipe below 50°C, and use a large water volume intensive water distributor to ensure that the surface of the pipe is always covered with a water film and there are no dry spots. When the surface temperature of the tube condenser is lower than 50°C, the scale generated is loose and easy to wash away. When the surface temperature is higher than 50°C, the scale generated is solid and difficult to remove. Setting up a water baffle to prevent water from adhering to the higher-temperature condensation tube can effectively prevent product scaling.