During the installation process of large chemical equipment, standardized installation procedures should be resolutely implemented, and the installation of the condenser can only be implemented after detailed inspection and measurement. Let the condenser manufacturer introduce it to you.
The installation distance of equipment pipe supports must comply with relevant regulations and must not exceed 3.6 meters, and must be firmly fixed. Secondly, the form, material and quality of the bracket must also comply with relevant standards. Otherwise, no matter how good the installation is, it will not be effective if the quality of the products produced by
Condenser Manufacturer is not up to standard.
Installation location
The basic principle of determining the installation position of the equipment is that it does not hinder the water spraying effect of its nozzle. Specifically, the distance between the bracket and the nozzle should not be less than 300 mm, and the distance between the bracket and the nozzle at the end must not exceed 750 mm. If the pipes of the tube condenser need to change direction, anti-sway brackets will also need to be added to ensure their stability. The condenser is a device that moves under the drive of a specific power and finally realizes solution. Under different power systems, its operating principles and performance characteristics are also different. It is divided into two types: natural circulation and forced circulation.
