Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Why Tube Sheet Deformation Occurs During Tube Condenser Processing

       The tube condenser has excellent chemical corrosion resistance. It has no destructive effect on inorganic compounds, regardless of acids, alkalis, and salt solutions, except for strong oxides, up to 100°C. It is insoluble in solvents at room temperature. Generally, it can be used on alkanes, hydrocarbons, alcohols, aldehydes, ketones and other media.
       Product tube sheet processing deformation analysis:
     The water side of the high-pressure tube sheet has high pressure and low temperature, while the steam side has low pressure and high temperature. Especially those with built-in hydrophobic cooling sections, the greater the temperature difference. If the thickness of the tube sheet is not enough, the tube sheet will have some deformation. The middle of the tube sheet will bulge toward the steam side with low pressure and high temperature. On the water side, a central depression occurs in the tube sheet.
   Especially when the peak shaving amplitude is large, the peak shaving speed is too fast or the load changes suddenly, the water side pressure will also change greatly under the condition of using a fixed speed feed water pump, and may even exceed the rated pressure of the high feed water: these changes will cause the tube plate to deform, leading to pipe port leakage or long-term deformation of the tube plate. If the steam inlet valve of Gaojia leaks internally, after the Gaojia is shut down during the operation of the tube condenser host, the high water side will be heated and the pressure will increase. If there is no safety valve on the water side or the safety valve fails, the pressure may rise very high and the tube sheet will deform.
1315 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke