Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Analysis of Wear Causes in Tube Condenser

       Due to the continuity of production during operation, the tube condenser will generally be in continuous operation, making it difficult to find leaks and difficult to deal with if found. So, what are the specific causes of wear and tear of this equipment?
       1. External force damage
  
       2. Wear and tear
 
Tubular condenser
       3. Poor quality
       In most cases, the leakage of the tube condenser is at the weld between the end flower plate and the tube head. Weld leakage can only indicate a welding quality problem. Since this part is usually welded by manual arc welding, there are phenomena such as slag inclusions, bubbles, incomplete welding seams, and incomplete welding. These situations are difficult to judge at the initial stage, but they will be exposed after using it for a period of time.
       4. The quality of steel pipes is poor
   The shell of the tube condenser is exposed to the outside. The tubes are evenly distributed inside the shell, and both ends are welded to the flower plates at both ends of the shell. The tubes will not be damaged by external forces. These condensers have not been used for a long time, and the wear and corrosion damage mentioned above will not be too serious. Therefore, it can only be considered that the leakage of the tubes is caused by the quality of some steel pipes.
1409 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke