Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Series or Parallel Connection for Tube Condenser

       The heat exchanger in the tube condenser is made of low-rib finned copper tubes, and adopts scientific manufacturing processes such as transverse baffles, longitudinal turbulent plate structures and mechanical expansion tubes. In actual use, to cool hydraulic oil with the same flow rate and initial temperature, two pieces of equipment with the same specifications must be used, and each must have its own separate water path and cooling water with the same flow rate and temperature. These two devices can be used in parallel or in series.
       If the oil outlet is to receive low-temperature oil flow, the series connection method is more effective than the parallel connection method. Because when the tube condensers are connected in series, the flow rate of the oil is accelerated, the heat transfer coefficient will increase, and the heat transfer amount will become larger; and the flow rate of the oil becomes longer, which is equivalent to an increase in the heat exchange area, so the heat transfer amount will also increase.
       However, it should be noted that when tube condensers are operated in series, it must be ensured that the heat exchange efficiency of the front condenser is higher than that of the latter condenser. Of course, this method also has some disadvantages, such as the speed of the oil is accelerated, the process becomes longer, the resistance loss of the process will become larger, and the power consumed by the oil pump will also increase.
   Therefore, whether used in series or in parallel, each has its own advantages, which need to be measured based on the actual situation.

1091 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke