Packing Seal
Definition of packing seal
Packing seals are also called Gland Packings seals, commonly known as Packings seals. Packing seal is an ancient sealing structure. In ancient water lifting machinery in my country, leakage was blocked by packing cotton yarn. The steam engines that appeared early in the morning also used this sealing form. The production and development of oil and natural gas extraction technology in the 19th century led to new developments in packing seal materials. By the 20th century, packing seals were favored by many industrial sectors because of their relatively simple structure, low price, and wide availability.
Principle of packing seal
At the same time, the lubricant impregnated in the filler is squeezed out, forming an oil film between the contact surfaces. Since the contact state is not particularly uniform, a "boundary lubrication" state occurs at the contact part, which is called the "bearing effect"; while the uncontacted concave parts form small oil grooves with a thicker oil film. The contact parts and non-contact parts form an irregular maze, which prevents liquid leakage. This is called the "maze effect". This is the mechanism of packing sealing. Obviously, good sealing lies in maintaining the "bearing effect" and "maze effect". In other words, maintain good lubrication and proper compression. If the lubrication is poor or the pressure is too tight, the oil film will be interrupted, causing dry friction between the packing and the shaft, which will eventually lead to shaft burning and severe wear.
Obviously, such frequent squeezing of the filler will eventually deplete the impregnating agent, so regular replacement of the filler is necessary. In addition, in order to maintain the liquid film and take away frictional heat, it is also necessary to intentionally allow a small amount of leakage at the packing.