Principle
The material to be dried is added from the middle of the upper part of the casing. Under the stirring of the rake teeth that continuously rotate forward and reverse, the material moves back and forth axially. The surface in contact with the inner wall of the casing is constantly renewed and is indirectly heated by the steam. The uniform stirring of the rake teeth and the crushing of the crushing rod enable the surface moisture of the material to be discharged beneficially. The vaporized moisture passes through the dry dust collector, wet dust collector, and condenser, and is evacuated from the outlet of the vacuum pump.
Applicable materials
Apply under appropriate conditions
Material solution below 100 mesh, synthetic fiber, crystal, vacuum liquid, emulsion, sweet potato slices, mineral sand, etc. Suspension.
Technical parameters
|
Main parameters model |
Nominal volume |
Heat transfer area |
One load |
Absolute work pressure |
Operating temperature |
Spindle speed |
Material |
Weight |
Motor power |
Dimensions
Length×Width×Height |
|
Inside the cylinder |
Inside the jacket |
|
XPG0.5 |
0.5 |
1.86 |
0.2 |
0.021 |
0.686 |
435 |
15-20 |
|
|
Note: 3 |
|
|
Auxiliary: 5.5 |
|
XPG1 |
1 |
6 |
0.75 |
0.021 |
0.686 |
435 |
9 |
A3 |
3400 |
5.5 |
3700×945×3270 |
|
1Cr18Ni9Ti |
3300 |
|
XPG2 |
2 |
8 |
1.2 |
0.021 |
0.588 |
425 |
9 |
A3 |
4900 |
11 |
4570×1130×3455 |
|
1Cr18Ni9Ti |
4800 |
|
XPG3 |
3 |
11.5 |
11.5 |
1.021 |
0.588 |
425 |
9 |
A3 |
6400 |
15 |
6076×1130×2980 |
|
1Cr18Ni9Ti |
6300 |