evaporative condenser

Introduction
The evaporative condenser is a device that uses refrigeration to absorb the heat of the high-temperature gaseous refrigerant in the coil when the spray water outside the coil partially evaporates, so that the refrigerant in the tube is gradually cooled from gas to liquid.
Composition
How it works
That is, the gaseous refrigerant enters the discharge pipe from the upper port and is gradually condensed into liquid refrigerant from top to bottom. The super strong wind force of the accompanying induced draft fan makes the spray water completely and evenly cover the surface of the coil. The water takes advantage of the wind force to improve the heat exchange effect. The spray water with increased temperature changes from part to gaseous state. The latent heat of vaporization of the water is used to carry away a large amount of heat by the wind. The water droplets in the hot air are intercepted by the dehydrator, and scattered with the rest of the water that has absorbed the heat into the PVC water spray sheet heat exchange layer. It is cooled by the flowing air, the temperature is lowered, enters the water tank, and then continues to circulate through the circulating water pump. The moisture evaporated into the air is automatically replenished by the water level regulator.
); Among them, the carbon steel hot-dip zinc type evaporative condenser is the first product and accounts for most domestic users. It is mainly used for high-pressure gas condensation and cooling, and the applicable pressure range is 0-30MPa; the aluminum alloy type evaporative condenser is a new generation product suitable for ice machine refrigerant condensation, and the applicable pressure range is 0-5MPa; stainless steel tube evaporative condensers are mainly used in corrosive gas cooling and condensation processes in some chemical plants.
The casing of the refrigeration evaporative condenser is generally made of galvanized sheet. Later, due to its poor corrosion resistance, galvanized sheet was gradually used. Newly used in the market is aluminized magnesium-zinc sheet. This sheet has the characteristics of stainless steel, does not rust, has a good appearance, and is easy to process.