Welcome to [Wuxi Chemical Equipment Co., Ltd.] website!

咨询热线:

Why Weld Seams of Tube Condenser Leak

       In most cases, the leakage of the tube condenser is at the butt weld between the end flower plate and the tube head. Butt weld leakage can only indicate a welding quality problem. Considering that manual arc welding is generally used for this part, there are phenomena such as slag inclusions, bubbles, incomplete butt welds and insufficient penetration. These conditions are not easy to determine in the early stage, but they will be exposed after using it for a while. So why do the welds of tube condenser leak?
   The shell of the tube condenser is exposed to the outside. The tubes are evenly distributed inside the shell, and both ends are welded to the flower plates at both ends of the shell. The tubes will not be interfered by external forces. However, it has not been used for a long time, and the wear and corrosion mentioned above will not be too serious. Therefore, it can only be considered that the leakage of the tubes is due to the poor quality of most steel pipes.
989 次

相关文档

Copy right © 2019 Wuxi Chemical Equipment Co., Ltd. All Rights Reserved Website Design: Wuxi Wangke