How Condensate Heat is Discharged in Tube Condenser
During the refrigeration process, the tube condenser plays the role of outputting heat energy and condensing the refrigerant. After the high-pressure superheated steam discharged from the refrigeration compressor enters the condenser, all the heat it absorbs during the working process, including the heat absorbed from the evaporator and refrigeration compressor and in the pipeline, is transferred to the surrounding medium (water or air) and taken away. The high-pressure superheated vapor of the refrigerant recondenses into a liquid. So, how is the heat of condensation water discharged?
The heat released by the condensation water has a great influence on
The effect of the tube condenser; the condensed water in each effect shell side of the evaporation equipment is generally discharged as condensed water together. Since the temperature of the condensed water in the effect body shell side exceeds the shell side temperature and the vacuum degree is high, when the condensed water enters the shell side, the condensed water will release corresponding heat due to self-evaporation.
The shell side of each effect body takes steam, and the tube side takes raw materials. Usually, when the non-condensable gas interface extracts non-condensable gas, a corresponding amount of heating steam must be brought out at the same time. This is mainly because theoretically, according to the heat balance during the whole heating process, there is no remaining heating steam for each effect shell side. In fact, each effect body can be used as a tube condenser and it is unlikely that there will be no residual heating steam. Because heat loss needs to be taken into account in the calculation process, the temperature of the raw materials before entering the evaporation equipment is relatively low, and it must be gradually preheated before it can reach the boiling point or the boiling point and above.